ADDER - CCS-XB
Controller with CATx link cable and 4x LED monitor displays
Catalogusprijs:
€ 246,00*
Dealer prijs - Aanmelden
Levertijd: Momenteel ongeveer 3-4 weken
Prijzen voor grotere hoeveelheden op aanvraag.
Phone: +31 (0) 6 512 97 427 or e-mail: shop@s-connect-benelux.com
Phone: +31 (0) 6 512 97 427 or e-mail: shop@s-connect-benelux.com
Artikelnummer van de fabrikant:
CCS-XB
Ons artikelnummer:
490356
Vragen? Wij adviseren u graag! → Contactformulier
Productinformatie "ADDER - CCS-XB"
The CCS-XB lighting module is an accessory that connects to the CCS4-USB. It gives users the ability to place an LED indicator on each screen to identify which screen you are controlling. The colour and intensity can be controlled for each screen. A maximum of 10 lighting indicators can be supported.
Scope of delivery: CCS-XB console, power supply, rubber feet, four LED monitor displays
Optional accessories:
Scope of delivery: CCS-XB console, power supply, rubber feet, four LED monitor displays
Optional accessories:
- CCS-LED: LED monitor display
Features
- Add-on module for use with CCS4USB and Free-Flow. This module controls a series of LED lights that are mounted on your screens. The LEDs are fully configurable, allowing the user to assign a specific colour and intensity via the setup application. These units offer loop-through support for additional accessories such as the RC4 or RC8 remote control modules for more flexibility. Each LED module is pre-wired with 3m of cable, allowing the user to easily route the module to the screen. The flexible cable used has an oval profile that facilitates plugging into trunking, wall gaps or similar room features.
- Each LED is housed in a sturdy moulded case and is fitted with an adhesive pad that allows the module to be attached to a screen bezel or other surface as required.
- The CCS-XB is powered via an interface, making installation very simple.
- Each CCS-XB is supplied with 4 LED modules. Additional modules can be ordered with the order code CCS-LED (maximum 10 per unit)
Technical details
Hardware compatibility
For use with CCS4 USB devices with firmware 2.0 or higher
Connection to CCS4
10p10c connector via cable VSC46
Connections to the desktop
Robust metal construction. 95 mm (3.7 inches (W), 30 mm / 1.2 inches (H)), 65 mm (2.6 inches (D)), 0.22 kg (1.65 pounds).
Operating temperature
0 to 40ºC / 32 to 104ºF
Approvals
CE, FCC
Hardware compatibility
For use with CCS4 USB devices with firmware 2.0 or higher
Connection to CCS4
10p10c connector via cable VSC46
Connections to the desktop
- 10 x 6P6C connectors for the CCS LED modules
- 1 x 10P10C connector for upgrade cable or remote control RC4 4-button switch
Robust metal construction. 95 mm (3.7 inches (W), 30 mm / 1.2 inches (H)), 65 mm (2.6 inches (D)), 0.22 kg (1.65 pounds).
Operating temperature
0 to 40ºC / 32 to 104ºF
Approvals
CE, FCC