Barix - R6
Modbus remote I/O module with serial RS-485 Modbus/RTU interface, and 6 high current relays (230VAC,16A), UL listed, DIN Rail mountable
Catalogusprijs:
€ 165,00*
Dealer prijs - Aanmelden
Nog 42 stuks beschikbaar, levertijd: Uit voorraad, onmiddellijk beschikbaar
Prijzen voor grotere hoeveelheden op aanvraag.
Phone: +31 (0) 6 512 97 427 or e-mail: shop@s-connect-benelux.com
Phone: +31 (0) 6 512 97 427 or e-mail: shop@s-connect-benelux.com
Artikelnummer van de fabrikant:
2004.9041
Ons artikelnummer:
180030
Vragen? Wij adviseren u graag! → Contactformulier
Productinformatie "Barix - R6"
Barix R6 is a DIN-rail mountable relay module for commercial control, power switching and home automation applications.
Using the industry standard Modbus protocol over 2-wire RS-485 the device can be controlled from any Modbus capable master.
Each relay has three connections (common, normally closed and normally open) available at screw terminal blocks supporting wires from AWG 26 / 0.15 mm² up to AWG 14 / 2.5 mm².
To connect to other Barix devices the Barix R6 features two extension connectors on both sides of the device carrying power and RS-485 signals (one extension cable included). Barix R6 supports Modbus/RTU protocol at speeds of 9’600 and 19’200 Bauds, with and without parity. Special commands have been added to the Barionet R6 to support also non Modbus native control systems. Up to 31 Barix extension units can be directly connected to a Modbus Master such as the Barix Barionet and can be increased to up to 250 devices using standard RS-485 repeaters. Using the Barix Barionet, the Barix R6 can be controlled by a local Basic application (BCL) as well as remotely using TCP, UDP, Modbus/TCP and SNMP.
Barix R6 is a low cost alternative to add high power switching capabilities to Modbus systems.
A mounting bracket is available as an accessory.
Scope of delivery: BARIX - R6
Using the industry standard Modbus protocol over 2-wire RS-485 the device can be controlled from any Modbus capable master.
Each relay has three connections (common, normally closed and normally open) available at screw terminal blocks supporting wires from AWG 26 / 0.15 mm² up to AWG 14 / 2.5 mm².
To connect to other Barix devices the Barix R6 features two extension connectors on both sides of the device carrying power and RS-485 signals (one extension cable included). Barix R6 supports Modbus/RTU protocol at speeds of 9’600 and 19’200 Bauds, with and without parity. Special commands have been added to the Barionet R6 to support also non Modbus native control systems. Up to 31 Barix extension units can be directly connected to a Modbus Master such as the Barix Barionet and can be increased to up to 250 devices using standard RS-485 repeaters. Using the Barix Barionet, the Barix R6 can be controlled by a local Basic application (BCL) as well as remotely using TCP, UDP, Modbus/TCP and SNMP.
Barix R6 is a low cost alternative to add high power switching capabilities to Modbus systems.
A mounting bracket is available as an accessory.
Scope of delivery: BARIX - R6
| Connection: | Relais, Serial Ports RS232, RS422/485 |
|---|---|
| Fieldbus options: | ModBus |
| Option: | Programmable |
| Power Supply: | External |
| Protocol: | ModBus, RS 422 / 485 |
| Serial Ports: | 1 Port |
| Temperature Range: | Standard Temperature Range |
Features
- 6 relays (250 VAC 10 A, NO & NC)
- RS-485 serial interface
- Protocol: Modbus/RTU
- Two extension connectors for easy daisy chaining of power supply, additional relay units (R6), I/O units (IO12) etc.
Technical details
Relays
Relays
- 6 relays (250 VAC 10 A, 16 Amax <1sec) on screw block with common, NO (normally open) and NC (normally closed) contacts
- for wires AWG 26 – AWG 14 / 0.15 – 2.5 mm²
- Power/RS-485 on detachable screw block for wires AWG 28 – AWG 16 / 0.08 – 1.3 mm²
- 2 extension connectors (3”/75 mm cable incl.)
- RS-485 (2-wire), 9’600/19’200 Baud, 8 bit, Even/No parity software configurable,
- Modbus/RTU protocol
- 1 LED for power indication
- 1 LED for RS-485 active send indication
- 6 LED for relay status indication
- Internal connector for default settings jumper
- 12 to 24 VAC / 9 to 30 VDC
- 3.5 Watt max. (all relays active)
- high quality plastic, 220 grams, DIN-rail mount.
- 4.13“ x 3.34“ x 2.83“/105 mm x 85 mm x 32 mm
- Min. 237 000h acc. to MIL217F at 25°C ambient temperature