Perle Systems - IDS-305
Industrial Managed Ethernet Switch - 5 ports: 5 x 10/100/1000Base-T RJ-45 ports. -10 to 60C operating temperature. PRO software feature set
Catalogusprijs:
€ 702,00*
Dealer prijs - Aanmelden
Levertijd: Momenteel ongeveer 3-4 weken
Prijzen voor grotere hoeveelheden op aanvraag.
Phone: +31 (0) 6 512 97 427 or e-mail: shop@s-connect-benelux.com
Phone: +31 (0) 6 512 97 427 or e-mail: shop@s-connect-benelux.com
Artikelnummer van de fabrikant:
07013270
Ons artikelnummer:
221628
Vragen? Wij adviseren u graag! → Contactformulier
Productinformatie "Perle Systems - IDS-305"
The IDS-305 is a 5 port Managed Ethernet Switch that can operate in industrial 10/100/1000-Base-T environments providing advanced performance and enabling real-time deterministic network operation.
Perle Industrial-grade Ethernet Switches are designed to stand up to extreme temperatures, surges, vibrations, and shocks found in industrial automation, government, military, oil and gas, mining and outdoor applications.
Simple Plug and Play installation to get your Ethernet devices networked immediately is available with Perle’s Fast Setup feature. The familiar Command Line Interface (CLI), via in-band Telnet or the out-band serial console port, will be appreciated by CCNA (Cisco Certified Network Associate) and CCNP (Cisco Certified Network Professional) trained engineers.
The PRO feature set in the IDS-305 is ideal for sophisticated environments where additional extensive security and network integration functionality is required.
The IDS-305 supports a comprehensive set of management functions, such as MRP (IEC62439-2), PROFINET, Modbus TCP, management VLAN, QoS, RMON, N:1 port mirroring and local alert log. In addition, the switch can be managed with an IPv6 address.
These rugged fan-less switches are hardened to provide superior reliability in -10 to 60°C. In addition, every component on every industrial (XT) model has been designed and tested to handle operating temperatures between -40 and 75C.
All Perle Industrial Ethernet Switches only use high-end components from the leading chip manufacturers to ensure the highest level of durability and reliability. In addition, all units have a corrosion resistance aluminum case and dual redundant power input with reverse polarity and overload protection.
For over 35 years Perle has been designing industrial hardware. This expertise was used to design the toughest Ethernet switches on the market.
Scope of delivery: Perle Systems - IDS-305
Perle Industrial-grade Ethernet Switches are designed to stand up to extreme temperatures, surges, vibrations, and shocks found in industrial automation, government, military, oil and gas, mining and outdoor applications.
Simple Plug and Play installation to get your Ethernet devices networked immediately is available with Perle’s Fast Setup feature. The familiar Command Line Interface (CLI), via in-band Telnet or the out-band serial console port, will be appreciated by CCNA (Cisco Certified Network Associate) and CCNP (Cisco Certified Network Professional) trained engineers.
The PRO feature set in the IDS-305 is ideal for sophisticated environments where additional extensive security and network integration functionality is required.
- TACACS+ and RADIUS authentication, authorization and accounting (AAA) security services
- SSH, SNMPv3, Telnet and HTTPS secure management sessions
- IP address and IP Port number Management Access Lists (ACL)
- Password Strength Checking
- Protection of User Access Ports through IEEE 802.1x Authentication and Port Security
- Advanced protocols to optimize the performance and intelligence of the network: LLDP, GVRP, Voice VLANs, MSTP, GMRP, IPv4 IGMP Snooping and IPv6 MLD Snooping
The IDS-305 supports a comprehensive set of management functions, such as MRP (IEC62439-2), PROFINET, Modbus TCP, management VLAN, QoS, RMON, N:1 port mirroring and local alert log. In addition, the switch can be managed with an IPv6 address.
These rugged fan-less switches are hardened to provide superior reliability in -10 to 60°C. In addition, every component on every industrial (XT) model has been designed and tested to handle operating temperatures between -40 and 75C.
All Perle Industrial Ethernet Switches only use high-end components from the leading chip manufacturers to ensure the highest level of durability and reliability. In addition, all units have a corrosion resistance aluminum case and dual redundant power input with reverse polarity and overload protection.
For over 35 years Perle has been designing industrial hardware. This expertise was used to design the toughest Ethernet switches on the market.
Scope of delivery: Perle Systems - IDS-305
| Connection: | 10 / 100 / 1000 |
|---|---|
| Fieldbus options: | ModBus, PROFINET |
| Port Number: | 5 Ports |
| Power Supply: | 12V DC, 24V DC, 48V DC |
| Temperature Range: | -10°C to 60°C |
Features
- 5 port 10/100/1000Base-T for Gigabit and Fast Ethernet devices
- Advanced switching, VLAN, encryption and IEEE 1588 PTP
- PROFINET and Modbus TCP Protocol Support
- Compact, corrosion resistant case attaches to a standard DIN Rail
- Redundant dual power input 12/24/48 VDC
- Programmable Controller safety and Hazardous Location Certification
- -40 to 75C industrial operating temperature
Technical details
Power
Dual Power Input: Both inputs draw power simultaneously. If one power source fails, the other live source can, acting as a backup, supply enough power to meet the operational needs of the switch. 12/24/48 VDC Nominal. (9.6 to 60 VDC)
Power Connector: 4-Pin Removable Terminal Block. Grounding screw on metal chassis
Maximum Current Consumption @24 vDC: 0.15 amps
Maximum Power Consumption @24 vDC: 3.6 watts
Overload Current Protection: Fused overload current protection
Reverse polarity protection: The positive and negative inputs can be reversed providing safe and simple power connectivity.
Access Ports
RJ45: 5 shielded RJ45 ports for 10/100/1000Base-T up to 100 meters (328 ft); Auto-negotiation; Auto-MDI/MDIX-crossover for use with either crossover over straight-through cable types; Ethernet isolation 1500 V
RJ45 Serial Console port: RJ45 DTE; Optional rolled and straight thru RJ45 cables and DB adapters are available
Alarms
Alarm Relay: NC (Normally Closed) dry contact; 1A @ 24V
Switch Properties
Standards: IEEE 802.3 for 10Base-T; IEEE 802.3u for 100Base-TX and 100Base-FX; IEEE 802.3ab for 1000Base-T; Energy Efficient Ethernet (EEE) as per 802.3az; IEEE 802.3x for Flow Control
Processing Type: Store and Forward
MAC Address Table Size: 8K
VLAN ID range: 1 to 4000
IGMP groups: 1024
Packet Buffer Memory: 1 Mbit
Jumbo Frame Size: 10 KB
Indicators
Power: This LED is turned on when the appropriate level of voltage is applied to one or both of the power inputs
System: Indicates whether the switch O/S is operating normally
RJ45 Ethernet: These integrated colored LEDs indicate link, activity and speed for each port.
Alarm: The alarm LED (Red) will be turned on under alarm conditions
P-Ring Master LED: Status of the P-Ring Master
Backup Network Coupling: Indicates whether or not the “Backup Network Coupling” feature is enabled (Redundant links connecting two P-Ring networks)
Environmental Specifications
MTBF: 320,305 Hours
Operating Temperature Ranges:
Standard temperature models (Std): -10° C to 60° C (14° F to 140° F).
XT Industrial extended temperature models (Ind) : -40° C to 75° C (-40 F to 167° F)
Storage Temperature Range: Minimum range of -25° C to 75° C (-13° F to 167° F). -40 C to 85 C (-40 F to 185 F) for industrial extended temperature models
Operating Humidity Range: 5% to 90% non-condensing
Storage Humidity Range: 5% to 95% non-condensing
Maximum Heat Output: 12.3 Btu/hr
Operating Altitude: Up to 3,048 meters (10,000 feet)
Chassis: Metal with an IP20 ingress protection rating
Din Rail Mountable: DIN Rail attachment included. Mounts to standard 35 mm DIN rail in accordance with DIN EN 60175. Removable to accommodate optional Panel/Wall mount kit.
Product Weight and Dimensions
Weight: 0.61kg (1.34 lbs)
Dimensions: 45 x 130 x 121mm
Power
Dual Power Input: Both inputs draw power simultaneously. If one power source fails, the other live source can, acting as a backup, supply enough power to meet the operational needs of the switch. 12/24/48 VDC Nominal. (9.6 to 60 VDC)
Power Connector: 4-Pin Removable Terminal Block. Grounding screw on metal chassis
Maximum Current Consumption @24 vDC: 0.15 amps
Maximum Power Consumption @24 vDC: 3.6 watts
Overload Current Protection: Fused overload current protection
Reverse polarity protection: The positive and negative inputs can be reversed providing safe and simple power connectivity.
Access Ports
RJ45: 5 shielded RJ45 ports for 10/100/1000Base-T up to 100 meters (328 ft); Auto-negotiation; Auto-MDI/MDIX-crossover for use with either crossover over straight-through cable types; Ethernet isolation 1500 V
RJ45 Serial Console port: RJ45 DTE; Optional rolled and straight thru RJ45 cables and DB adapters are available
Alarms
Alarm Relay: NC (Normally Closed) dry contact; 1A @ 24V
Switch Properties
Standards: IEEE 802.3 for 10Base-T; IEEE 802.3u for 100Base-TX and 100Base-FX; IEEE 802.3ab for 1000Base-T; Energy Efficient Ethernet (EEE) as per 802.3az; IEEE 802.3x for Flow Control
Processing Type: Store and Forward
MAC Address Table Size: 8K
VLAN ID range: 1 to 4000
IGMP groups: 1024
Packet Buffer Memory: 1 Mbit
Jumbo Frame Size: 10 KB
Indicators
Power: This LED is turned on when the appropriate level of voltage is applied to one or both of the power inputs
System: Indicates whether the switch O/S is operating normally
RJ45 Ethernet: These integrated colored LEDs indicate link, activity and speed for each port.
Alarm: The alarm LED (Red) will be turned on under alarm conditions
P-Ring Master LED: Status of the P-Ring Master
Backup Network Coupling: Indicates whether or not the “Backup Network Coupling” feature is enabled (Redundant links connecting two P-Ring networks)
Environmental Specifications
MTBF: 320,305 Hours
Operating Temperature Ranges:
Standard temperature models (Std): -10° C to 60° C (14° F to 140° F).
XT Industrial extended temperature models (Ind) : -40° C to 75° C (-40 F to 167° F)
Storage Temperature Range: Minimum range of -25° C to 75° C (-13° F to 167° F). -40 C to 85 C (-40 F to 185 F) for industrial extended temperature models
Operating Humidity Range: 5% to 90% non-condensing
Storage Humidity Range: 5% to 95% non-condensing
Maximum Heat Output: 12.3 Btu/hr
Operating Altitude: Up to 3,048 meters (10,000 feet)
Chassis: Metal with an IP20 ingress protection rating
Din Rail Mountable: DIN Rail attachment included. Mounts to standard 35 mm DIN rail in accordance with DIN EN 60175. Removable to accommodate optional Panel/Wall mount kit.
Product Weight and Dimensions
Weight: 0.61kg (1.34 lbs)
Dimensions: 45 x 130 x 121mm